Engineering Tutoring from Aerospace Engineer: Aerospace/Mechanical/Electrical Engineering

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed. 1. Mechanics: Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration. Dynamics: Newton's laws, work and energy, kinetic energy theorem. 2. Electromagnetism / Electrokinetics: Electrostatics: Electric charges and fields, electric potential, capacitance. Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction. Alternating Currents: RLC circuits, resonance, impedance. 3. Thermodynamics: Principles of thermodynamics: Internal energy, heat, work, first and second principles. Ideal and real gases: Equations of state, thermodynamic transformations. 4. Industrial sciences: Automatic Linear, Kinematic, Static. For more information and to register for the preparation session, please contact me. Good preparation and success in your studies! .

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

Here is a short description for each area: 1. Civil Engineering This course provides an introduction to the fundamentals of civil engineering, including blueprint reading, construction techniques, site management, and the use of professional software such as AutoCAD and Robot Structural Analysis. Ideal for students, technicians, and anyone interested in the construction industry. 2. Computer science (Word & Excel) A practical course to master essential office tools: Word for professional writing (reports, resumes, formatted documents) and Excel for automatic calculations, tables, graphs, and data management. Perfect for students, employees, or job seekers. 3. Languages (Arabic, French, English) Courses tailored to all levels to improve oral and written communication, grammar, pronunciation, and vocabulary. Whether for study, work, or travel, courses are personalized to suit your schedule.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process. Key topics covered include: - Fundamentals of electrical engineering principles and standards. - Introduction to Building Information Modeling (BIM) concepts and workflows. - Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting. - Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans. - Performing electrical load analysis and simulation to ensure system efficiency and compliance. - Best practices for organizing, managing, and sharing electrical project data effectively. Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering. For more information, please do not hesitate to text me.

My lessons are structured to be clear, interactive, and tailored to each student’s needs. We start by identifying your current level and goals, then build a personalised learning plan. Each session includes: • Step-by-step explanations • Practice problems with guidance • Real-world examples (especially for maths and engineering topics) • Time for questions and review Whether you’re preparing for exams, catching up on schoolwork, or learning software like PTC Creo, I’ll help you build confidence and understanding at your own pace.

Dive into the dynamic world of engineering and science with this comprehensive course designed for aspiring engineers and scientists. This course is structured to provide you with a robust foundation in key principles and practices that are essential in these fields. You'll explore fundamental concepts in physics, chemistry, and mathematics, and learn how to apply these principles to solve real-world problems. The course covers critical topics such as mechanics, thermodynamics, materials science, and electrical circuits. In addition to theoretical knowledge, you'll engage in hands-on projects and experiments that illustrate practical applications. You'll develop skills in data analysis, experimental design, and technical communication, preparing you for advanced study or a career in engineering and science. Join us to unlock the potential of engineering and science, and start your journey towards innovation and discovery.

Are you looking for tailored support to help you succeed in your scientific studies? I offer you much more than simple academic support: a real progression strategy, based on excellence and pedagogy. 👨‍🏫 Who am I? - PhD student in mathematics applied to fluid mechanics, passionate about modeling and digital sciences - Graduate of the École Polytechnique, one of the most prestigious scientific training programs - Solid experience in teaching and mentoring, from high school to higher education (prep, bachelor's, engineering school) 📈 My specialties: - Mathematics: algebra, analysis, probability, differential equations... - Physics: mechanics, thermodynamics, electromagnetism, etc. - Computer Science & Python: algorithms, scientific programming, data-oriented projects or simulation 🚀 My promise: - Clear explanations adapted to your level - An effective method based on in-depth understanding - Visible results and a real increase in skills - Personalized support and motivating guidance Contact me now for an initial discussion: your goals become my mission.

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs. Homework help for Baccalaureate students. preparation for the competition. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

God willing, it is possible to explain the subjects of the Communications Department, such as antennas, electromagnetic waves, mobile phone communications, signal analysis, electromagnetic fields, and some subjects of Electrical Engineering, such as electrical circuits, forces, and electrical machines, and some subjects of the Computers Department, such as programming. It is also possible to explain the subjects of Engineering Mathematics.

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

🔹 Does your child feel overwhelmed by Maths or Physics? 🔹 Struggling with tricky exam questions and falling behind? 🔹 Worried about their confidence before GCSEs or A-Levels? I’m a engineer turned tutor with experience in aerospace & Formula 1, and I help students master Maths & Physics with clear explanations, real-world applications, and proven exam techniques. I have tutored and mentored student from GCSE to University degree level. 💡 Why Parents Trust Me: ✅ Results-Driven – My students consistently improve by 1-2 grade levels ✅ Exam-Ready Focus – I teach how to tackle tricky questions confidently ✅ Structured Learning – No more confusion, just clear, step-by-step guidance ✅ Boosts Confidence – Many students start enjoying the subject again! ✅ Flexible & Reliable – I fit around busy school & family schedules 📚 Subjects Covered: 🔹 Maths: Algebra, Geometry, Trigonometry, Statistics, Calculus, Mechanics 🔹 Physics: Forces, Electricity, Waves, Thermodynamics, Kinematics 🔹 Engineering Fundamentals: Problem-solving, applied mathematics 🎯 Who is this for? ✔️ Students aiming for top grades (A/A)* in GCSE & A-Level exams ✔️ Those who struggle with confidence & exam pressure ✔️ Parents who want structured, high-quality tutoring that delivers results

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB. Some of the finite element modeling and numerical simulations I have worked on include: - Multiscale finite element modeling for fatigue crack propagation in porous materials. - Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper]. - Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles. - Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials. - Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions. If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Associate professor giving support courses in the subjects of Physics and Engineering Sciences dedicated to students in Technical Baccalaureate, Higher Technician Certificate BTS and in CPGE preparatory classes (MPSI, TSI, PSI). The objective is to strengthen your foundations and deepen your knowledge to succeed in your DS and exams. 1. Industrial sciences: Analytical and graphical statics - Kinematics - Kinetics - Dynamics - Energetics Automatic Linear - servo control Industrial design - theory of mechanisms 2. Physics: Thermodynamics - electrokinetics - mechanics of the material point and of non-deformable solids.

As a second-year student in the BSc Aerospace Engineering program at the Technical University of Delft (TU Delft), I have experience with the university entrance process as well as being qualified to explain the curriculum and requirements in depth. necessary. In addition to offering guidance on the essential topics for your entrance exam, I can provide you with personalized classes for in-depth preparation. These classes would include a detailed review of key concepts, intensive practice with relevant exercises, and specific tips to effectively approach the exam. My goal is to help you acquire the confidence and skills necessary to be successful in the admissions process in addition to the first year material that may seem a little more difficult or unknown. Additionally, I will be happy to discuss with you the study program itself, as well as explore the various opportunities available in Delft to complement your academic experience.

Electrical engineering is the foundation of modern technology, powering everything from household appliances to industrial automation. This class is designed to introduce beginners to the core concepts of electrical engineering, making complex topics easy to understand. You will learn about: Basic electrical concepts: Voltage, current, resistance, and power Circuit analysis techniques: Ohm’s Law, Kirchhoff’s Laws, and network theorems Introduction to electronic components: Resistors, capacitors, diodes, and transistors etc Hands-on projects using breadboards and simulation software By the end of this course, students will have a strong understanding of electrical fundamentals and be able to apply them in real-world applications, including Arduino and Raspberry Pi projects.