In these Engineering Classes, I guide, mentor, and facilitate your growth and intuitive technical understanding. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

I am a young architect and urban designer, and completed my masters this year at Faculty of Architecture and Urbanism, .I am an advanced softwear user, and I am interested to spread my knowledge about the softwears I am specialised at. This class is for architecture students or architects, who are interested in learning the basics of ArchiCad,Revit... but also more advanced ways of using this softwear. Archicad ,Revit is becomming a very popular softwear, that is used more and more in the architecture studios and offices from Netherlands. In case you are willing to do an internship in a studio that uses ArchiCad, and you have never used it before, this course is the perfect way to get introduced, and be sure that you will be ready to start your internship properly. Other than ArchiCad, Revit I can also teach Adobe Photoshop, designing and architecture, and give guidance to modelmaking.

I'm committed to creating a dynamic and engaging learning environment., and I'm passionate about helping students discover the joy of learning. My teaching style is focused on making complex concepts accessible through real-world examples, interactive activities, and hands-on projects. I strive to foster a classroom community where students feel confident to ask questions, make mistakes, and learn from one another.I always follow up and keep in touch with students regarding any problems they face. There is also special attention to assignments, exams, and solving important questions, and there is periodic follow-up

Do you wish you could build things with electronics and mechanical components? Maybe your house needs a web-connected doorbell, or you want to publish your air quality measurements to the web. Or maybe you're already experienced and you have an automatic cat flap opener or motion-triggered foam dart shooter? Whatever your home electronics/mechatronics project, I can help you get started, improve, or complete it. I have extensive professional experience designing electronic circuits, PCBs, and the software to control them, and I've tutored privately for years as well. The way I work is to help you solve your most pressing and confusing issues during our class, then give you a short lesson to help you understand better what to do next time, and then leave you with some homework tasks you can do in your own time to progress your project - this saves you money and gives you a better competency result! I have a 3D printer, a metalworking shop, and all the benchtop tools we might need to develop your projects, as well as some generic arduinos, breadboards, and passive components - all you need to provide is (some of) the specific materials for your project.

I am an Art Historian experienced in teaching both children and adults at schools and art galleries. The focus is to show the uniqeness of every artistic period in Europe and challenge students to distinguish the differences between styles. The course will not only consist of a theoretical part, but also a practical one where students will learn how to paint using a baroque light and techniqe.

Electricity, Electronics, and Arduino Programming Course, designed to teach you everything you need to know to succeed in the world of robotics and smart technologies! - Start with the basics of electricity and electronics: circuits, components, and simple concepts. - Learn Arduino programming: from writing your first programs to creating advanced robotic systems. - Work on hands-on projects to build and control your own interactive robots. - Explore mobile robotics: control motors, servos, displays, and more. - Learn how to use Bluetooth, RFID, and other connectivity tools for innovative projects. - Discover how to use all types of sensors for smart home applications and home automation (domotics). - Get guidance on managing projects: from developing your idea to achieving the final result. This course is perfect for beginners and anyone passionate about technology, offering a clear and practical path to master robotics, mobile systems, and smart home technologies.

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

I am a highly skilled and experienced Architect with a great experience in Architecture software. Photoshop is an important software, not only for Architects. I'm Strongly knowledgeable about all approaches of Photoshop. More than anything else, a Creative designer with a will for improving learners` productivity levels as well as improving learning experiences. I work with Adobe Photoshop, Autocad, and Revit in addition I can train you to use most graphic design applications.

Prestressed concrete is a type of concrete in which certain stresses are applied to the concrete before it is subjected to any load or pressure during its use in construction. This is usually done by tensioning steel wires or rods into the concrete using special devices, and then the concrete is held in a prestressed position. Then, when loads are applied to the concrete during its use, these initial stresses enhance its ability to carry loads better. Advantages: Increased endurance: Helps to withstand heavy loads and high pressures. Reduce cracks: It helps reduce cracks that may appear as a result of heavy loads. Use less material: It can help reduce the amount of concrete and steel required compared to regular concrete. Greater resistance to tension: Prestressed concrete is more resistant to tensile forces than regular concrete. Uses: Bridges: Commonly used in bridges, where concrete must withstand huge loads. Tunnels: Also used in the construction of tunnels and underground passages. High-rise buildings: They may be used in the construction of tall buildings that require high load-bearing capacity.

Familiarize Yourself with the Basics Understand the Interface: Learn the layout, menus, and viewport navigation. Panels like Layers, Properties, and Command Line. Toolbars and viewports (Top, Front, Right, and Perspective). Install Rhino: Download the latest version of Rhino from the official website and install it. Shortcut Keys: Get acquainted with common shortcuts to improve efficiency. 2. Learn Navigation and View Manipulation Camera Controls: Use mouse actions or commands to zoom, pan, and rotate the view. Viewports: Work with multiple viewports simultaneously. Display Modes: Understand wireframe, shaded, rendered, and other display styles. 3. Master the Basic Modeling Tools Create 2D Geometry: Lines, polylines, circles, rectangles, and curves. Transform Commands: Move, rotate, scale, mirror, and copy objects. Modify Curves and Surfaces: Use tools like split, join, trim, and fillet. 4. Explore Advanced Modeling Techniques NURBS Modeling: Learn how Rhino uses Non-Uniform Rational B-Splines (NURBS) for precision modeling. Surface Modeling: Build complex surfaces with commands like loft, sweep, and revolve. Solid Modeling: Create closed solid objects using extrude, boolean operations, and offset surfaces. SubD Modeling: Understand Subdivision modeling for organic shapes. 5. Work with Layers and Organization Layer Management: Organize objects on different layers to manage complexity. Grouping and Block Creation: Group objects or create reusable blocks for repeated elements. 6. Rendering and Visualization Material Assignment: Apply textures and materials to models. Lighting: Add lights for enhanced rendering. Rendering Engines: Use Rhino's built-in renderer or plugins like V-Ray or KeyShot.

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB. Some of the finite element modeling and numerical simulations I have worked on include: - Multiscale finite element modeling for fatigue crack propagation in porous materials. - Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper]. - Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles. - Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials. - Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions. If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

In today's interconnected world, communication technologies transform our lives and work. As a future communications engineer, you'll need a strong foundation in electrical engineering principles to design, develop, and deploy the next generation of communication systems. This course serves as a practical introduction to the fundamentals of electrical engineering, specifically tailored to the needs of those pursuing a career in communications. You'll learn core concepts such as circuit analysis, signal processing, electromagnetic fields, and digital communications. This knowledge will equip you to understand and design wireless communication systems, analyze communication networks, and contribute to advancements in areas like 5G, IoT, and satellite communications. This course will provide you with the essential skills to thrive in the dynamic field of communications engineering.

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

A talented, experienced, very creative and studious architect offers private lessons and assistance in various tasks related to architecture: *help with designing plans (houses/offices/businesses, shopping centers, clinics, etc.) * training and realization of 3D plans * realization and training in AUTOCAD *design, correction of projects, research of ideas, models, etc.... *Revit: learning and correction... + personalized training according to the needs for students and professionals in minimum time and remotely across the world

The course of architectural design and executive drawings is a very important scientific subject for university students, as well as graduates of architectural engineering, and also lovers of the field. This course includes learning: The foundations of successful architectural design and how to distribute spaces How to make executive drawings from scratch to professionalism How to create an integrated architectural project and ready-to-implement executive drawings