Add to Wish List
Add to Wish List
Trusted teacher
from70.00EUR/ h
Wind turbines technology and its main components functioning
Wind turbine technology,
different aspects that can be covered:
- electrical systems calculation.
- loads calculation.
- structural dynamics calculation.
- control system design.
Providing a complete understanding about how a wind turbine system as well as its components work.
different aspects that can be covered:
- electrical systems calculation.
- loads calculation.
- structural dynamics calculation.
- control system design.
Providing a complete understanding about how a wind turbine system as well as its components work.
Extra information
own computer and/or laptopLocation
Online via webcam
General info
Age: | Adults (18-64 years old) Seniors (65+ years old) |
---|---|
Student level: | Beginner Intermediate |
Duration: | 60 minutes |
The class is taught in: | English, Spanish, Catalan |
About Me
I'm a easy going teacher, I really like curious and hard worker students.I like to spend as much time as necessary to provide the most complete explanation to help the student better understand.
These classes can be a perfect complement for an engineer willing to increase his/her renewable engineering formation and skills.
Education
DTU Wind Energy master by Danish Tecnical University - DTU (Denmark). Two years course.Industrial Engineering master by Universitat Jaume I - UJI (Spain). Five years course.
Experience / Qualifications
13 years experience as renewable project engineer and many years as engineering department supervisor. RE Energy consultant expertSolar PV technology, different aspects that can be covered:
- electrical systems calculation.
- control system design.
- monitoring, diagnosis and maintenance.
Providing a complete understanding about how a solar PV power plant as well as its components work.
Development of an algorithm methodology to minimize the hybrid
power produced forecast error so it’s important to keep in mind that I’m not presenting an optimization model in this work. I’ll show the dependency of the battery size used for this purpose so using the forecast error we will reduce its variability. We will see what positive
effects adding a battery within a hybrid wind and solar power plant has, its sensitivity effect, having as main advantages these:
• reduction of the curtailment produced, bigger battery size less curtailment.
• repair of the forecast error
- Wind Energy and Solar PV engineering projects.
- Electrical Engineering projects.
- Renewable energy production.
- Hybrid Power Plants with energy storage.
- Power production monitoring.
- Power plant optimization.
- Algorithm model implementation.
- Matlab coding.
Ask a question
Send a message explaining your needs and Emilio will reply soon:
The more detail, the better.
Ex. "Hi, when are you available to meet for a lesson?"
Ex. "Hi, when are you available to meet for a lesson?"
Availability of a typical week
(GMT -05:00) New York
Mon | Tue | Wed | Thu | Fri | Sat | Sun | |
---|---|---|---|---|---|---|---|
0 | |||||||
1 | |||||||
2 | |||||||
3 | |||||||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | |||||||
10 | |||||||
11 | |||||||
12 | |||||||
13 | |||||||
14 | |||||||
15 | |||||||
16 | |||||||
17 | |||||||
18 | |||||||
19 | |||||||
20 | |||||||
21 | |||||||
22 | |||||||
23 |
from 70€Online via webcam
100% Satisfaction Guarantee
Good-fit Instructor Guarantee
If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.
Online reputation
- Instructor since September 2020
Availability of a typical week
(GMT -05:00) New York
Mon | Tue | Wed | Thu | Fri | Sat | Sun | |
---|---|---|---|---|---|---|---|
0 | |||||||
1 | |||||||
2 | |||||||
3 | |||||||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | |||||||
10 | |||||||
11 | |||||||
12 | |||||||
13 | |||||||
14 | |||||||
15 | |||||||
16 | |||||||
17 | |||||||
18 | |||||||
19 | |||||||
20 | |||||||
21 | |||||||
22 | |||||||
23 |
from 70€Online via webcam
Good-fit Instructor Guarantee
If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.
Share
You are here
Private lessons
online via webcam
Similar classes
Reza
Tutor for Math, Physics, and Mechanical/Material Engineering coursesI hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).
My extensive teaching experience covers a wide range of engineering courses, including:
- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.
- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.
- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.
- CAD/CAM Software: Autocad, Solidworks.
- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.
My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction
I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.
If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)
Ayoub
Specialized Courses for Higher Education Students - CPGE, INSA, INP, ECE...This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.
1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.
2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.
3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.
4. Industrial sciences:
Automatic Linear, Kinematic, Static.
For more information and to register for the preparation session, please contact me.
Good preparation and success in your studies!
.
Mohammed
Research writing on Business, Management, Physics, Mathematics, Engineering and Computer ScienceResearch on business management, accounting and economics.
I am a graduate of Business Management with distinction and i am capable of teaching this course fluently.
General Mechanical Engineering courses.....
I am a 4th year drop out of this filed but enthusiasts with the field of study.
General Computer Engineering, Computer Science and Software Engineering.
I am self taught compute science professional.
Samaa
Mathematics for Students (GCSE, IGCSE, IB CNISE, SAT) and other systemsI teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.
I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.
My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.
My qualifications
-Master Degree in Engineering
-An experienced teacher for over 2 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.
Amin
Thermodynamics and Heat Transfer for engineers, for the lifeThermodynamics deals with heat, work, and temperature, and their relation to energy, entropy, and the physical properties of matter and radiation. The behavior of these quantities is governed by the four laws of thermodynamics.
The science of thermodynamics is a very sweet and conceptual science. Many concepts that we face in reality are examined in thermodynamics.
Laws of thermodynamics, entropy generation and analysis and investigation of various thermodynamic cycles, etc. are things that are taught in class.
references : Cengel , Borgnakke.
Abdeer
Engineering sciences/Industrial sciences for CPGE/RDM/elasticity/Mechanics of fluids and solids/Industrial computingAs an associate professor of industrial sciences and mechanical engineering, I give private lessons at the following level:
* Engineering science courses for the final class Sciences maths B
* Industrial Sciences courses for scientific CPGE MP/PSI/PTSI
* Course of the mechanical modules of solids.
For schools and faculties:
* RDM and MMC courses
* Mechanical construction course
* Course of industrial computing modules
Nezhla
Mathematics and Physics and engineering in all levelsI have a Phd and I am postdoc researcher in in the field of Mathematics and Physic.
I have several teaching experiences at university , high schools and in Africa,
I can teach math and physics in a very differnt way that you never forget it.
because I did several years of research which gives different perspective than being only a teacher.
Tim
Mechanics, Physics, Thermodynamics: Higher education - private lessons.Need help with mechanics, physics or thermodynamics? As a civil engineer, 31, I am happy to help you! Learn at your pace and with many examples to clarify the learning material. I have years of experience in learning simple and complex material.
The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.
However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.
Are you interested? Don't hesitate to receive me!
Please come!
Tim
Ashwani
Mathematics, Physics (High school), Mechanical Engineering (UG-PG students)Solid mechanics is a key area of mechanical engineering which have key ingredient of mathematics and physics. I love to teach and share the knowledge gained over these years on Mathematics, Physics and various courses in mechanical engineering.
Oualid
I give private lessons in Physics - Chemistry - thermodynamics - fluid mechanics - RDM to students from the French or Arabic program.I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs.
Homework help for Baccalaureate students.
preparation for the competition.
For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.
Muktim
Comprehensive Mathematics and Numerical Skills Development for All LevelsStrong numerical skills are essential for everyone. If you're looking to take things a step further and dive deeper into the fascinating world of equations and numbers to uncover their meanings, I'll guide you through them in a way best suited to your needs.
The lessons will include:
* A brief discussion of the topics and concepts to be covered
* Learning outcomes and potential future applications
* Highlighting key concepts and understanding their origins or derivations
* Focusing on understanding (rather than simply memorizing) the concepts and equations
* Practical examples of varying difficulty
* And possibly some homework :)
P.S. If you have a specific need, I will do my best to accommodate it.
Matías
Learn computer-aided design and 3D printing from a passionate expert! CATIA V5/V6, Inventor, Fusion360, FreeCAD.Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.
CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.
Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.
Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.
FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.
️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.
Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.
Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!
Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!
See you soon for our first class together!
Tom
Engineering graduate and pharmaceutical manufacturing professional teaching maths and physics at GCSE and A-LevelI am a true believer in bringing academic skills and techniques to life in order to best understand and tackle future problems within the subject. Having both studied and applied teaching techniques to previous students, I pride myself on being able to identify which form of learning works best.
A lesson will usually last 1-2 hours depending on the content we will be working through. The first session will be to understand what aspects of the subject(s) they understand or would like to focus on, followed by time to best identify how they learn best, allowing me to tailor the tutoring experience.
After getting A*s and As in Maths, Further Maths, and Physics A-Levels, I went on to complete a bachelor's degree in Mechanical Engineering from Cardiff University. After graduating, I joined a pharmaceutical company, taking on multiple roles over the 4 years working there.
With both academic and real-world knowledge in engineering and tutoring engineering, and experience in tailoring teaching methods to maximize a student's learning ability
Abubakar
3D Modelling for CAD designers, Students and Professionals.3D Modelling Tutoring: Learn to Create in 3D
Take your first steps into the world of 3D design or sharpen your skills with our personalised 3D Modelling Tutoring. Whether you're a beginner or looking to improve, we'll guide you through leading software like Onshape, Fusion360, or SOLIDWORKS.
What you’ll learn:
3D geometry, texturing, lighting, and shading.
Rendering and exporting models for 3D printing.
Who’s it for:
Beginners, students, or professionals in design, animation, or architecture.
Flexible scheduling with tailored, one-on-one lessons to fit your needs.
أمين
Teacher of Mechanical Engineering, Physics, Mathematics, Statics, and MATLABTeacher of Mathematics, Physics, and Mechanical Engineering, with over 10 years of experience.
Mechanical vibrations, material resistance, mechanical design, control, robotics,
Dynamics, control, vibration, robotics, MATLAB and others
Courses instructed:
1.Introduction to Robotics (MEE 4201)
2. Introduction to Mechatronics (MEE 1209)
3. Engineering Mechanics-I and II (Statics &Dynamics), (ME2108&ME2203)
4.Engineering Drawing (GE2207)
5. Machine Design (ME4101)
6. Automation (MEE5104)
7. Engineering Drawing II (SolidWroks), (GEN 126)
8. Robotics (MME 106, MS level)