from2.40EUR/ h
Mechanical Design and manufacturing of production tools
1- Fits and tolerances
Types of fits for different applications – select dimension tolerances – geometrical tolerances
2- Fixtures and jigs
Define and selecting part references – types of fixing and clamping tools – design reference plating and clamping tools – finishing your fixture design and detailing
3- Gauge and measuring tools
Types of gauges – calculations for different types – design and detailing measuring device
4- Sheet metal dies
Design sheet metal part – types of sheet metal dies – design of sheet metal dies
5- Plastic molds
Types of plastic molds – design of plastic molds – design of plastic part
6- Assembling
Assembly constrains – types of assembling methods
7- Drawings and Detailing
8- Introduction to cad cam software
Types of fits for different applications – select dimension tolerances – geometrical tolerances
2- Fixtures and jigs
Define and selecting part references – types of fixing and clamping tools – design reference plating and clamping tools – finishing your fixture design and detailing
3- Gauge and measuring tools
Types of gauges – calculations for different types – design and detailing measuring device
4- Sheet metal dies
Design sheet metal part – types of sheet metal dies – design of sheet metal dies
5- Plastic molds
Types of plastic molds – design of plastic molds – design of plastic part
6- Assembling
Assembly constrains – types of assembling methods
7- Drawings and Detailing
8- Introduction to cad cam software
Location
At teacher's location: اسكوتر الكهرباء, حلوان، حلوان البلد، قسم حلوان، مصر
At student's location: Around Cairo, Egypt
|
Use ⊞+wheel to zoom!
General info
Age: | Teenagers (13-17 years old) Adults (18-64 years old) Seniors (65+ years old) |
---|---|
Student level: | Beginner Intermediate Advanced |
Duration: | 60 minutes 120 minutes |
The class is taught in: | Arabic, English |
Solid works Essentials
1- Sketching
Sketch starting - Sketch tools –– sketch relations –automatic relations- reference geometry
2- dimension tools
Smart Dimension - Fully Defining a Sketch – automatic dimensions
3- Modeling features
Extruding features – revolve features - sweep features – loft features – shell features draft features rib features – chamfer and fillets – pattern – Wrap – hole wizard – ribs – draft
4- Measure and Mass Properties Tools
Applying Material Properties – Measure tools – Mass and properties
5- Assembly
Standard Mates - Clearance Detection & Interference Detection - Move and Rotate Components
6- Drawings and Detailing
Drawing and Section Views - Detailing dimensions -
7- Sheet Metal
Introduction to Sheet Metal – Flanges - Tab – Miter flanges – edit flanges – sketch bending - Hem - Jog– convert to sheet metal – Loft bend - Flat Patterns – forming tool
Plastic part design
Feeding System
Cooling system
Ejection System
- Design plastic part with NX
- Start with mold wizard
- Applied mold wizard mold tools on the part
Check region – mold csys – shrinkage – work piece –cavity layout
- Applied mold wizard mold tools on the part (patch surface – define region – parting surface – define cavity and core
- Cooling System
- Injection system
- Ejection system with ejection pins sleeves and stripper plate
Family Mold (2 parts in one mold)
Apply stripper pate ejection
Chapter One: Physical Measurement
Elements of the measurement process
∎ Dimensional formula
∎ Multiples and fractions of units
∎ Types of measurement
∎ Error in measurement
Chapter Two: Standard quantities and vector quantities
Chapter One: Movement in a straight line
∎ Movement
∎ Speed
∎ The wheel
Chapter Two: Motion with uniform acceleration
∎ Equations of motion with uniform acceleration
∎ Applications on uniformly accelerated motion (free fall and projectiles)
Chapter Three: Motion with uniform acceleration
∎ Strength
∎ Newton’s laws of motion (first law).
∎ Newton’s laws of motion (second law).
Linear movement
Unit one Physical measurement
Unit two motion in straight line
1- Sketching
Starting NX part - Sketch starting - Sketch tools –– sketch relations –automatic relations- Datum plans - axis
2- dimension tools
Smart Dimension - Fully Defining a Sketch – automatic dimensions
3- Modeling features
Extruding features – revolve features - sweep features – Rule features – shell features - draft features rib features – chamfer and fillets – pattern – Hole wizard – ribs – draft - face tools – unite subtract and intersect
4- Measure and Mass Properties
Applying Material Properties – Measure tools – measuring Mass- volume and weight
5- Assembly
Assembly constrains - Move and Rotate Components – pattern and mirror component and body
6- Drawings and Detailing
Drawing and Section Views - Detailing dimensions - detail view - parts list - auto balloons - geometry tolerance
7- Sheet Metal
Introduction to Sheet Metal – Flanges - Tab – contour flanges – edit flanges – sketch bending - Hem – bridge bend - jog– convert to sheet metal – sheet metal forming - Flat Patterns – forming tool
Ask a question
Send a message explaining your needs and Ashraf will reply soon:
The more detail, the better.
Ex. "Hi, when are you available to meet for a lesson?"
Ex. "Hi, when are you available to meet for a lesson?"
Availability of a typical week
(GMT -05:00) New York
Mon | Tue | Wed | Thu | Fri | Sat | Sun | |
---|---|---|---|---|---|---|---|
0 | |||||||
1 | |||||||
2 | |||||||
3 | |||||||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | |||||||
10 | |||||||
11 | |||||||
12 | |||||||
13 | |||||||
14 | |||||||
15 | |||||||
16 | |||||||
17 | |||||||
18 | |||||||
19 | |||||||
20 | |||||||
21 | |||||||
22 | |||||||
23 |
from 2.40€At teacher's location
from 3.60€At student's home
100% Satisfaction Guarantee
Good-fit Instructor Guarantee
If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.
Online reputation
- Instructor since October 2023
- Phone number verified
- Google connected
Availability of a typical week
(GMT -05:00) New York
Mon | Tue | Wed | Thu | Fri | Sat | Sun | |
---|---|---|---|---|---|---|---|
0 | |||||||
1 | |||||||
2 | |||||||
3 | |||||||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | |||||||
10 | |||||||
11 | |||||||
12 | |||||||
13 | |||||||
14 | |||||||
15 | |||||||
16 | |||||||
17 | |||||||
18 | |||||||
19 | |||||||
20 | |||||||
21 | |||||||
22 | |||||||
23 |
from 2.40€At teacher's location
from 3.60€At student's home
Good-fit Instructor Guarantee
If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.
Share
You are here
Similar classes
Youssef
engineering sciences, electrical circuit, electrical engineering, programming, electronics, automation, physics===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS
Tim
Mechanics, Physics, Thermodynamics: Higher education - private lessons.Need help with mechanics, physics or thermodynamics? As a civil engineer, 31, I am happy to help you! Learn at your pace and with many examples to clarify the learning material. I have years of experience in learning simple and complex material.
The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.
However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.
Are you interested? Don't hesitate to receive me!
Please come!
Tim
Amin
Thermodynamics and Heat Transfer for engineers, for the lifeThermodynamics deals with heat, work, and temperature, and their relation to energy, entropy, and the physical properties of matter and radiation. The behavior of these quantities is governed by the four laws of thermodynamics.
The science of thermodynamics is a very sweet and conceptual science. Many concepts that we face in reality are examined in thermodynamics.
Laws of thermodynamics, entropy generation and analysis and investigation of various thermodynamic cycles, etc. are things that are taught in class.
references : Cengel , Borgnakke.
Anh
Engineering Tutoring with Mentoring: Easy and Effective! - Aerospace/Mechanical/Electrical EngineeringIn these Engineering Classes, I guide, mentor, and facilitate your growth and intuitive technical understanding.
I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning.
Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics.
Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way.
Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you!
__________________________________________________________________________________
Previously supported students from top universities such as:
UK:
- Imperial College London (+ Business School) (ICL)
- University College London (UCL)
- King's College London (KCL)
NL:
- Delft University of Technology (TUDelft)
- University of Amsterdam
- University of Groningen
SW
- ETH Zurich - Swiss Federal Institute of Technology
AU
- Queensland University of Technology
- University of Queensland
- Griffith University
__________________________________________________________________________________
A little about myself:
My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry.
I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students.
I am working as an Engineering Specialist/Consultant, holding:
- a degree as a Master of Aeronautical Engineering from Imperial College London,
- A*A*A* A-Level Further Maths and Physics, with,
- straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography.
I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.
Ashwani
Mathematics, Physics (High school), Mechanical Engineering (UG-PG students)Solid mechanics is a key area of mechanical engineering which have key ingredient of mathematics and physics. I love to teach and share the knowledge gained over these years on Mathematics, Physics and various courses in mechanical engineering.
Oualid
I give private lessons in Physics - Chemistry - thermodynamics - fluid mechanics - RDM to students from the French or Arabic program.I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs.
Homework help for Baccalaureate students.
preparation for the competition.
For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.
Tom
Engineering graduate and pharmaceutical manufacturing professional teaching maths and physics at GCSE and A-LevelI am a true believer in bringing academic skills and techniques to life in order to best understand and tackle future problems within the subject. Having both studied and applied teaching techniques to previous students, I pride myself on being able to identify which form of learning works best.
A lesson will usually last 1-2 hours depending on the content we will be working through. The first session will be to understand what aspects of the subject(s) they understand or would like to focus on, followed by time to best identify how they learn best, allowing me to tailor the tutoring experience.
After getting A*s and As in Maths, Further Maths, and Physics A-Levels, I went on to complete a bachelor's degree in Mechanical Engineering from Cardiff University. After graduating, I joined a pharmaceutical company, taking on multiple roles over the 4 years working there.
With both academic and real-world knowledge in engineering and tutoring engineering, and experience in tailoring teaching methods to maximize a student's learning ability
Dipisha
New learners to learn and excel in the field of MathematicsI was previously myself a student of Mathematics in statistics. I had help student prepare for many exam like PTE, SAT, Finnish entrance exam called UAS and many more.
I really don't care about age as I teach student from age group of 10 to 30 and so on but my major subject is Mathematics after that English, History and then I love Biology too
Jeremy
Design Technology, Product Design, Graphic Design and Engineering - iGCSE, GCSE and A Level.I am a UK qualified, and experienced, Design Technology tutor. I specialise in teaching iGCSE, GCSE and A Level: Design Technology, Product Design, Graphic Design and Engineering, to students who need that extra bit of help. My students come from the UK and all across the world! I work across multiple time zones to help your child gain high grades at: iGCSE, GCSE, A Level and Degree. I'll help with coursework, the NEA and with exams. I can also help prepare your child for external awards, private school scholarships and competitions such as the Arkwright Engineering Scholarship.
Matías
Learn computer-aided design and 3D printing from a passionate expert! CATIA V5/V6, Inventor, Fusion360, FreeCAD.Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.
CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.
Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.
Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.
FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.
️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.
Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.
Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!
Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!
See you soon for our first class together!
Fasih
Master CAD/CAM Software and Installation TechniquesClass Title: Master CAD/CAM Software and Installation Techniques
Description:
Unlock your potential in CAD/CAM with expert guidance! I offer personalized lessons in leading CAD/CAM software like SolidWorks, PowerMill, Mastercam, and more. Whether you're a beginner or looking to advance your skills, I will walk you through the design process, toolpath creation, and advanced features. Additionally, I'll teach you how to correctly install and set up the software to ensure seamless performance on your system.
Key Topics:
CAD design fundamentals
CAM programming and toolpath strategies
Installation and setup of CAD/CAM software
Optimizing software for efficient workflow
Real-world project simulations
Ideal for students, professionals, and enthusiasts ready to enhance their skill set in mechanical design and manufacturing!
Reza
Tutor for Math, Physics, and Mechanical/Material Engineering coursesI hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).
My extensive teaching experience covers a wide range of engineering courses, including:
- Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics.
- Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more.
- Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc.
- CAD/CAM Software: Autocad, Solidworks.
- Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA.
My research and teaching interests are diverse, including:
• Additive manufacturing
• Mechanical metamaterials
• Acoustical metamaterials
• Electromagnetic metamaterials
• Aeroacoustics
• Soft matter and soft robotics
• Fatigue and fracture mechanics
• Experimental mechanics
• Multiscale numerical modelling
• Biomaterials
• Porous materials
• Manufacturing of medical devices and implants
• Deep learning
• Image processing
• Topology optimization
• Origami and Kirigami structures
• Self-folding and self-assembly structures
• Tissue engineering
• Permeability in porous materials
• Fluid-Solid Interaction
I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.
If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)
Issam
Rhinoceros for Beginners: Experimenting with Rhino's Basic 3D Modeling ToolsRhinoceros has become a major 3D Modeling tool in the architectural and design market. As an advanced user of Rhino who has been using it for more than 7 years, I enjoy its amazing capabilities that revolutionize previous 3D modeling tools by incorporating advanced tools and excelling in the organic realm. I've used it during my bachelor and master's university years to model my projects because of its speed and enormous capability. It excels in linear and curvy forms and combines the best of both worlds with its versatile commands and features. This class introduces you to this fascinating software step by step. I'll make sure to guide you from getting to know the interface to being able to model elementary structures.
Abubakar
3D Modelling for CAD designers, Students and Professionals.3D Modelling Tutoring: Learn to Create in 3D
Take your first steps into the world of 3D design or sharpen your skills with our personalised 3D Modelling Tutoring. Whether you're a beginner or looking to improve, we'll guide you through leading software like Onshape, Fusion360, or SOLIDWORKS.
What you’ll learn:
3D geometry, texturing, lighting, and shading.
Rendering and exporting models for 3D printing.
Who’s it for:
Beginners, students, or professionals in design, animation, or architecture.
Flexible scheduling with tailored, one-on-one lessons to fit your needs.
أمين
Teacher of Mechanical Engineering, Physics, Mathematics, Statics, and MATLABTeacher of Mathematics, Physics, and Mechanical Engineering, with over 10 years of experience.
Mechanical vibrations, material resistance, mechanical design, control, robotics,
Dynamics, control, vibration, robotics, MATLAB and others
Courses instructed:
1.Introduction to Robotics (MEE 4201)
2. Introduction to Mechatronics (MEE 1209)
3. Engineering Mechanics-I and II (Statics &Dynamics), (ME2108&ME2203)
4.Engineering Drawing (GE2207)
5. Machine Design (ME4101)
6. Automation (MEE5104)
7. Engineering Drawing II (SolidWroks), (GEN 126)
8. Robotics (MME 106, MS level)