Metrology in engineering and basic engineering workshop training

These courses provide a comprehensive understanding of the fundamental principles of thermodynamics and fluid mechanics, emphasizing real-world applications in engineering, physics, and environmental systems. Students will develop problem-solving skills through theoretical concepts, numerical examples, and interactive simulations. Key Topics Covered: Thermodynamics: Laws of thermodynamics (Zeroth, First, Second, Third) Thermodynamic systems & processes (isothermal, adiabatic, etc.) Entropy, enthalpy, and heat engines PV diagrams & cycle analysis (Carnot, Rankine, Brayton) Phase transitions & properties of pure substances Fluid Mechanics: Fluid properties (viscosity, density, pressure) Bernoulli’s equation & conservation laws Laminar vs. turbulent flow (Reynolds number) Boundary layers, drag, and lift forces Pipe flow analysis & pump systems

Doctor and graduate in mechanical engineering, I give private lessons at the following level: * Kinematic Model Course (direct or inverse) * Dynamic Model Course (direct or reverse) * Static Model Course (direct or inverse) * Course Planning the trajectory * Robot Control Course * Programming course on Matlab or RoboStudio.

Mechanical engineering topics is a broad field that covers various related to the design, analysis, and manufacturing of mechanical systems. Here's a brief overview of the core subjects you would typically study during a mechanical engineering program at university: Mathematics: Calculus: For understanding changes in systems, modeling dynamic behavior, and analyzing forces and motions. Linear Algebra: Used for solving systems of equations, matrix operations, and structural analysis. Differential Equations: Essential for modeling physical systems that change over time (eg, motion, heat, fluid flow). Probability and Statistics: For analyzing data, reliability, and risks in engineering systems. Physics: Mechanics: Studying the forces and motion in solid bodies (statics and dynamics). Thermodynamics: Understanding energy systems, heat transfer, and the conversion of energy between mechanical forms. Fluid Mechanics: Focuses on the behavior of fluids (liquids and gases) in motion and at rest, which is essential for systems like pumps, engines, and turbines. Material Science: Exploring the properties of materials and how they behave under various conditions (stress, temperature, etc.). Statics and Dynamics: Statics: Study of forces in equilibrium, such as the forces on structures or machines that are not moving. Dynamics: Study of forces and motion in systems that are in motion, including vibrations, acceleration, and kinematics. Strength of Materials: Learning how materials respond to various forces, including stress, strain, bending, and torsion. This is essential for designing durable and safe structures and machines. Manufacturing Processes: Understanding different manufacturing techniques such as casting, welding, machining, 3D printing, and material forming. Concepts of production planning, quality control, and design for manufacturability. Control Systems: Study of systems that maintain desired outputs (eg, in robotics or automated systems). This includes understanding feedback loops and stability. Machine Design: Focus on designing mechanical components (gears, shafts, bearings) to perform specific tasks reliably and efficiently. Heat Transfer: Studying how heat moves through materials and fluids, which is critical for applications like engines, HVAC systems, and electronics cooling. Dynamics of Machinery: The study of moving mechanical components, their vibrations, and how to design them to minimize failure and wear. Computational Methods: Learning how to use software tools (like CAD, FEM, and CFD) for designing, simulating, and analyzing mechanical systems. Robotics and Automation: Study of robotic systems, automation in manufacturing, and how to integrate mechanical components with electronic control systems. Renewable Energy and Sustainability: Topics related to sustainable engineering solutions, energy-efficient systems, and the use of renewable energy sources (wind, solar, etc.).

Are you facing challenges with your current engineering courses? Are you in a position where you need to resit an exam? Are you considering using professional tutoring/mentoring support to excel in the upcoming (resit) exams? If any of these topics resonate with you, these classes may be what you're looking for. In these special, tailored classes, we will uncover what is it that is potentially holding you back in your performance and understanding, and attack these issues head-on. With this, I will guide, mentor, and facilitate your growth and intuitive technical understanding further. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

Hi, I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success. Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs. Feel free to contact me for more information !

Hello everyone and have a nice day, As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him. Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen. For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an. There is a lot of expertise in this article, too: - Matlab, Simulink, - S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation, - Electrical drives and E-Motoren, - STM32 Microcontroller, - Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme, - Power electronics / Leistungselektronik, - Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten, - ... There is a lot of contact with you. Very nice greetings

This course offers a comprehensive exploration of structural engineering principles, designed for both beginners and those seeking to deepen their knowledge. We will cover foundational concepts such as load analysis and structural systems, before progressing to advanced topics including indeterminate structures analysis. Join me to build a solid foundation and advance your existing knowledge through a set of appropriate theoretical concepts and practical examples

Teaching All Engineer Courses for Mechanical Engineering Students which will suits also Mechanical Engineering Students, Electrical Engineering Students and Computer Engineering Students. It will include theoretical teaching lessons and practical teaching lessons and also include many software such as Matlab.

Associate professor giving support courses in the subjects of Physics and Engineering Sciences dedicated to students in Technical Baccalaureate, Higher Technician Certificate BTS and in CPGE preparatory classes (MPSI, TSI, PSI). The objective is to strengthen your foundations and deepen your knowledge to succeed in your DS and exams. 1. Industrial sciences: Analytical and graphical statics - Kinematics - Kinetics - Dynamics - Energetics Automatic Linear - servo control Industrial design - theory of mechanisms 2. Physics: Thermodynamics - electrokinetics - mechanics of the material point and of non-deformable solids.

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). My extensive teaching experience covers a wide range of engineering courses, including: - Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics. - Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more. - Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc. - CAD/CAM Software: Autocad, Solidworks. - Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA. My research and teaching interests are diverse, including: • Additive manufacturing • Mechanical metamaterials • Acoustical metamaterials • Electromagnetic metamaterials • Aeroacoustics • Soft matter and soft robotics • Fatigue and fracture mechanics • Experimental mechanics • Multiscale numerical modelling • Biomaterials • Porous materials • Manufacturing of medical devices and implants • Deep learning • Image processing • Topology optimization • Origami and Kirigami structures • Self-folding and self-assembly structures • Tissue engineering • Permeability in porous materials • Fluid-Solid Interaction I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter. If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

===================Satisfied or refunded======================= Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming). Computational Sciences and Technology SNT IS engineering sciences Numerical and computer science SNI Digital electronics Analog electronic electromagnetism Signal processing and data acquisition Automatic (discrete, continuous) electrical engineering (transformers, electrical machines, switching power supply) C/C++ Programming, Assembler, ARM, STM32 renewable energy (wind, PV-solar) RDM - strength of materials mechanics of solids Python and SYSML PIC microcontroller Microprocessor MATLAB, proteus Preparation for competitions Supervision of graduation projects CAPLP Electrotechnical and Electronic Electrical Engineering CAPLP and BTS subjects and answers Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020 CORRECTION OF BTS TESTS

Tutoring help for design and manufacture/ product design, please provide me with topics you would like assistance on and I can tailor a lesson for your needs. I am a professional product design engineer, have a masters degree with distinction from the university of Strathclyde and an A at higher from the SQA.

I am doing a PhD. I can explain everything in the mechanical engineering curriculum, such as thermodynamics, work transition, fluid mechanics, mechanics, Autocad, NX, Solidworks, Matlab, Ansys. Also math, linear algebra, differential equations. I have been working as a research assistant for five years.

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs. Homework help for Baccalaureate students. preparation for the competition. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

Unlock the Potential of Mathematics with an Experienced PhD Educator! Online Are you or your child struggling with understanding complex mathematical concepts? Look no further! I am Dr. Siva, an accomplished PhD holder in Engineering. As a Chartered Engineer and Scientist, I bring a wealth of knowledge and expertise to the world of education. With over 15 years of teaching experience, I have honed a unique and modern teaching approach that utilizes cutting-edge digital tools and the latest insights from brain science. My focus is on ensuring knowledge retention through repetitive problem-solving techniques, empowering students to apply their learnings to real-world scenarios effectively. **Why Choose Me:** - Expertise in Teaching: As a university educator, I have a proven track record of nurturing students' intellectual growth and academic excellence. - Versatility: From university scholars to school students, I can adapt my teaching style to cater to any level of learning. - Global Reach: No matter where you are in the world, I offer online tutoring sessions for your convenience and accessibility.