ArchiCAD for architects, designers, interior designers, engineers.

Prestressed concrete is a type of concrete in which certain stresses are applied to the concrete before it is subjected to any load or pressure during its use in construction. This is usually done by tensioning steel wires or rods into the concrete using special devices, and then the concrete is held in a prestressed position. Then, when loads are applied to the concrete during its use, these initial stresses enhance its ability to carry loads better. Advantages: Increased endurance: Helps to withstand heavy loads and high pressures. Reduce cracks: It helps reduce cracks that may appear as a result of heavy loads. Use less material: It can help reduce the amount of concrete and steel required compared to regular concrete. Greater resistance to tension: Prestressed concrete is more resistant to tensile forces than regular concrete. Uses: Bridges: Commonly used in bridges, where concrete must withstand huge loads. Tunnels: Also used in the construction of tunnels and underground passages. High-rise buildings: They may be used in the construction of tall buildings that require high load-bearing capacity.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process. Key topics covered include: - Fundamentals of electrical engineering principles and standards. - Introduction to Building Information Modeling (BIM) concepts and workflows. - Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting. - Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans. - Performing electrical load analysis and simulation to ensure system efficiency and compliance. - Best practices for organizing, managing, and sharing electrical project data effectively. Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering. For more information, please do not hesitate to text me.

The course of architectural design and executive drawings is a very important scientific subject for university students, as well as graduates of architectural engineering, and also lovers of the field. This course includes learning: The foundations of successful architectural design and how to distribute spaces How to make executive drawings from scratch to professionalism How to create an integrated architectural project and ready-to-implement executive drawings

As an expert engineer and experienced trainer, I offer specialized training and personalized support for your projects in mechanical design, digital simulation and programming. Skills and tools taught: 🛠️ SolidWorks: 3D modeling, assemblies, mechanical simulations and design optimization. 📐 CATIA: Advanced design, complex surfaces, and analysis of mechanical systems. 🔬 MATLAB/Simulink: Programming, dynamic modeling, and system simulations. 🔥 ANSYS: Finite element analysis (FEA), thermodynamics, and structural mechanics. 📊 Scilab: Numerical calculation, scientific programming, and modeling. Who is this training for? 🎓 Students in mechanical, aeronautical, or industrial engineering. 🏭 Professionals wishing to improve or integrate these tools into their projects. 🚀 Passionate about CAD, simulation and advanced engineering. Why choose my training? ✔️ Practical methodology with concrete cases and targeted exercises. ✔️ Support for your academic or industrial projects. ✔️ Training adapted to beginner, intermediate and advanced levels. ✔️ Complete educational materials: tutorials, exercises and source files. Course format: Organization: Individual or group sessions. Modalities: Online or in person depending on your preferences. Flexibility: Duration and pace adapted to your needs.

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing. CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies. Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software. Fusion 360: Create organic models, run simulations, and hone your design and engineering skills. FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing. ️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production. Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence. Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today! Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget! See you soon for our first class together!

This class is designed for architecture students, professionals, and design enthusiasts who want to excel in Autodesk Revit. Whether you're a beginner looking to grasp the fundamentals or someone seeking to refine your skills, I provide tailored lessons to suit your goals. You will learn: Revit Basics: Interface, tools, and workflows. 3D Modeling: Creating detailed models for buildings and interiors. Documentation: Producing accurate plans, sections, and elevations. BIM Techniques: Collaborative workflows for efficient project management. Advanced Features: Parametric families, rendering, and schedules. As a qualified architect with extensive Revit experience, I bring real-world insights into my teaching. I have successfully guided both university students and professionals in mastering the program, helping them apply it effectively to academic and industry projects. My interactive lessons focus on practical, hands-on learning to ensure you gain confidence and proficiency in Revit.

A talented, experienced, very creative and studious architect offers private lessons and assistance in various tasks related to architecture: *help with designing plans (houses/offices/businesses, shopping centers, clinics, etc.) * training and realization of 3D plans * realization and training in AUTOCAD *design, correction of projects, research of ideas, models, etc.... *Revit: learning and correction... + personalized training according to the needs for students and professionals in minimum time and remotely across the world

Architect and Onthological Coach | Mentorships for entrepreneurs that are starting I plan the classes and exercises depending on the goal of the student. The programs that I teach are: AutoCAD 2D Sketchup Lumion 11 Photoshop Illustrator Dependiendo de la necesidad del alumno podemos aprender puntualmente alguna herramienta de diseño en particular de las siguentes: - AutoCAD 2d - Sketchup - Lumion 11 - Photoshop - Illustrator O mismo doy clases particulares despejando dudas sobre las materias o cursos de diseño que estén realizando.

Learning Architectural design concepts developing analytical skills to overcome design problems making environment a suitable place to live in.Teaching through design problems,exploring various required softwares to help demonstrate the ideas.

I am a highly skilled and experienced Architect with a great experience in Architecture software. Photoshop is an important software, not only for Architects. I'm Strongly knowledgeable about all approaches of Photoshop. More than anything else, a Creative designer with a will for improving learners` productivity levels as well as improving learning experiences. I work with Adobe Photoshop, Autocad, and Revit in addition I can train you to use most graphic design applications.

Currently in my 3rd year of architecture, I give architecture project lessons but also coach lessons, Sketchup, lumion. I can also give English lessons. At the beginning it is always difficult to master the software and to materialize your ideas well and it is for this reason that I wish to help others.

My name is Wael and I have been teaching architecture and general design classes for several years. I graduated from the University of Syria (Architecture) in 2015. I feel comfortable teaching college and university students as well as adults who want to enter the interior design profession. I understand that as creative individuals we all process information differently, therefore my teaching methods will be tailored to your requirements. Class times will also be scheduled around your availability. Regardless of your experience, I believe I can teach you Revit to accomplish what you need. My typical class is usually between 1-2 hours long. I have been teaching this software since 2013. I still use this software during my design projects. I teach students to adults who are looking to get into the interior design and architecture industry. Regions (I am available in almost all regions): West Flanders East Flanders

I specialise in teaching AutoCAD, Rhino, 3Ds Max, Illustrator, InDesign and Photoshop to students of various levels. My style of teaching is focused on practice. All classes have their goal - to expand the theory and practice to create something complete at the end. I think practice, whether or not you are a beginner or more advanced, is important for learning. Each class is personalized to the needs and interests of the students. I can also realise personal 2D, 3D design projects.

I specialize in teaching BIM modeling software like Revit and ArchiCad, Autocad for 2D to students of various levels. We build the course together, according to your desires, your projects, and your level. I give you the methodologies during lessons and then do little exercises. So that you are faced with problems that I will clear up. This process will make it possible to become autonomous on the software. I am passionate about this job and I love to pass on all my skills and interact with the world around me with all patience and motivation. I will be delighted to work with you! I am an Architect, 3D-Artist and Computational Design specialist. I graduated with a Master of Arts in Architecture in Dessau. I have more than 9 years of experience in the field of Architecture and Interior Design, Parametric Modeling, 2D/3D Architectural drawings, BIM, 3D modeling, visualization, animations, and rendering.

Adobe Photoshop and illutsrato are essential tools in archtitecure, in spedific the courses conatin: architecural projects presentations, concept diagrams, arrangement and page design for projects of all scales, use of textures for masterplans, diagrams and layout styles for concept presentations, Typographic Layouts: Developing skills in typography to create compelling text layouts and titles that support the visual hierarchy of presentations, making information more readable and engaging,Collage Techniques for Concept Development: Using collage styles to explore and communicate initial concepts and moods. These techniques can help convey abstract ideas, material combinations, or spatial atmospheres. The classes will be adopted to the students specific needs, in one of the three languges mentioned, italian, greek or english.