I am an associate professor of electrical engineering I offer courses in everything related to the discipline of electrical engineering: CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school ARCHITECTURE OF A PROGRAMMED SYSTEM INTERNAL AND EXTERNAL APPEARANCE INPUT/OUTPUT MANAGEMENT timeouts timers, watchdog PIC 16F8X 16F8XX PROGRAMMING INTERRUPTIONS MANAGEMENT ASSEMBLER PROGRAMMING PROGRAMMING IN C MACHINE CONTROL SOFTWARE SIMULATION MPLAB MIKROC ISIS/PROTEUS

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

With a complete virtual whiteboard and delivery of the material for each class (in PDF and via WhatsApp) at the end of the class, to study comfortably and without having to take notes). Wide range of hours available, tailored to your needs. I am a Private Tutor with many years of teaching experience and I am a graduate in Electronics Engineering at UTN-FRBA. I await your response to begin classes whenever you like.

doctoral student in engineering sciences provides support courses in analog and digital electronics at any DEUG level and engineering schools. having scientific and technical knowledge, three years of experience in the field of teaching, pedagogy and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they are having difficulty. for more info please contact me

More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way. Items that can be explained: Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC All subjects of electrical engineering department Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits -Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro. All electrical engineering subjects related

A distinguished private tutor with extensive experience in teaching mathematics, physics, chemistry, and science subjects according to the British and American curricula. This teacher has exceptional teaching skills and an advanced educational vision that helps students achieve their maximum potential and excel in scientific subjects. With his strong background in scientific subjects and his constant knowledge of the latest developments in the field of education, he is able to simplify difficult and complex concepts and explain them clearly to students. His interactive teaching method is enhanced and maximum use of class time is encouraged, as he encourages students to ask questions and actively participate in lessons. A symbol of commitment and professionalism, this teacher takes the time to assess the needs of each individual student and develop a customized learning plan to help them enhance their skills and overcome challenges they may face. With a deep understanding of different learning styles, he guides students in ways that suit their thinking style and needs. This teacher encourages students to develop their scientific and analytical thinking skills by solving practical exercises and applied problems. It also promotes independence and excellence by providing additional learning resources and directing students to trusted sources to continue their learning outside of class. With a strong interest in providing an enjoyable and rewarding learning experience, this teacher builds a strong relationship of trust with students and motivates them to achieve outstanding results. It works hard to provide a supportive and stimulating environment that contributes to maximizing the use of classes and ensuring the success of students in their academic and scientific careers. Experienced over 5 years, I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics, either at home or by internet online by a method of virtual class following a link that serves as a table plus Skype (a very modern and effective method) with results all mentioned since 2015 by this method or by the face-to-face method since 2002. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 5-8 hours maximum.

Teaching electrical and electronic engineering subjects through examples and practical explanations Examples of subjects that I can teach in Arabic and English: Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C And some other core subjects for electrical and electronic engineering major I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

Power Electronics is a specialty course specific to Electrical Engineering. You have the possibility of being followed with private lessons and homework help. All conversions are addressed -A summary on power switches and another on classic and advanced power topologies

Detailed explanation of basic electronics courses starting from basic elements to the most complicated structures, solid course with detailed explanation All electronic components Basic logic circuits integrated circuits

This class is for Electrical Engineering courses, including: Electrical Circuits (1/2) Electronics Signals & Systems Power Systems Control Systems Electromagnetics Digital Logic Power Electronics MATLAB & SIMULINK ETAP, PowerWorld PSpice, OrCAD, Multisim Sessions are tailored to the individual student's needs and goals, taking into account establishing a solid theoretical knowledge and then practicing with examples and sample questions. Students will be able to enter their exams with confidence and ease having practiced through several exam-type questions and past papers

Hello everyone, Engineer in Electrical Engineering by training, I give Engineering Science courses (Electricity & Mechanics) for high school students in technical or engineering science, and BTS students mainly in electricity. All the chapters and fundamentals of these two subjects are discussed. None of your questions will be left unanswered, and a large number of examples, explanations and simulations will be made available to you if desired. So do not hesitate to contact me if you are interested!

Basics of electronics engineering, Arduino programming, and smart home circuits Start learning from the basics of electronics and various electronic components And the electrical connections required to design and program smart home and Internet of Things circuits What is Arduino and what language is required to program it? How to design programs to control the home through a mobile phone Training on real Arduino circuits and also on simulation programs

Discover the electronics in-depth approach with a Chevron engineer. Diodes, amplifiers and filters of single and three-phase systems provide practical and theoretical experience. By integrating other related subjects, you can improve your competencies to excel at visualizing and analyzing complex electronic circuits.

Engineer in engineering sciences option electrical engineering Senior professor of engineering sciences SKILLS IS engineering sciences Embedded system (microcontrollers, z80 microprocessors, Motorola, ARM), Real-time system, network concept (OSI, TCP/IP), design of systems and electronic cards (analog, digital, power supply), signal processing, communication protocols ( SPI, I2C, CAN BUS, UART...), telecommunications. Technical skills : Languages: C / C ++, JAVA, VHDL / VERILOG, Python, Assembler. Professional software: MATLAB, SIS + PSIM + PSpice, QUARTUS, IDE68, Mikro C, Xilinix ISE, Labview, CoIDE. Technologies: Siemens PLC, Allen bradeley, STM32, FPGA, TIA Portal, STEP7, RSLogix  Electrical engineering: Electric motors, Transformers  Renewable energies: study of the solar pumping installation and the wind turbine installation.  Electronics: analog, digital, power electronics, system electronics and instrumentation biomedical.  Networks and telecommunications.  Industrial IT and programmable logic controllers.  Automatic: modeling, identification and control of systems.  Mechatronics.  MATLAB • Noise and vibration of asynchronous motors • Speed variator • Study and implementation of LV / MV standards • Electrical accreditation: NF C18-510 standard • NF C 15-100 electrical installations • Management of electrical energy in networks (Continuous Power Flow)

Course in Electronics: Microcontroller (PIC, atmega ..), Electronic circuit, Power electronics Automation course: GRAFCET, LADDER, Bascule, Combinatorial logic Electric motor: Asynchronous machine, DC motor, synchronous machine