Auto-Cad for command on technical drawings, Architecture / Engineering / Interior Designing

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed. 1. Mechanics: Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration. Dynamics: Newton's laws, work and energy, kinetic energy theorem. 2. Electromagnetism / Electrokinetics: Electrostatics: Electric charges and fields, electric potential, capacitance. Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction. Alternating Currents: RLC circuits, resonance, impedance. 3. Thermodynamics: Principles of thermodynamics: Internal energy, heat, work, first and second principles. Ideal and real gases: Equations of state, thermodynamic transformations. 4. Industrial sciences: Automatic Linear, Kinematic, Static. For more information and to register for the preparation session, please contact me. Good preparation and success in your studies! .

Prestressed concrete is a type of concrete in which certain stresses are applied to the concrete before it is subjected to any load or pressure during its use in construction. This is usually done by tensioning steel wires or rods into the concrete using special devices, and then the concrete is held in a prestressed position. Then, when loads are applied to the concrete during its use, these initial stresses enhance its ability to carry loads better. Advantages: Increased endurance: Helps to withstand heavy loads and high pressures. Reduce cracks: It helps reduce cracks that may appear as a result of heavy loads. Use less material: It can help reduce the amount of concrete and steel required compared to regular concrete. Greater resistance to tension: Prestressed concrete is more resistant to tensile forces than regular concrete. Uses: Bridges: Commonly used in bridges, where concrete must withstand huge loads. Tunnels: Also used in the construction of tunnels and underground passages. High-rise buildings: They may be used in the construction of tall buildings that require high load-bearing capacity.

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed. As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As. Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself and having completed the courses at university with excellent grades. Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood. I am looking forward to help you in your journey as an aerospace engineer!

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. With it being highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A massive part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material. As a cum laude graduated Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of valuable experience and knowledge of the program to help you out with the right preparation to get in. Moreover, after having successfully helped two international students get a spot last year, I have decided to continue preparing an additional custom lesson plan for each student, with the admission syllabus as its basis. With my calm and stepwise explanation, weaker topics will be addressed and your solution procedures will be polished. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, what to expect from the study and whether it is a right fit for you.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process. Key topics covered include: - Fundamentals of electrical engineering principles and standards. - Introduction to Building Information Modeling (BIM) concepts and workflows. - Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting. - Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans. - Performing electrical load analysis and simulation to ensure system efficiency and compliance. - Best practices for organizing, managing, and sharing electrical project data effectively. Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering. For more information, please do not hesitate to text me.

I am a 24 year old mechatronics engineer with years of teaching experience. I am to teaching any Math, Physics or any engineering related univeristy course. Bringing forth a deep passion for explaining and making my knowledge easily understanble to everyone.

Associate professor and trainer of mechanical engineering capable of teaching and training university students for: COMPETITION PREPARATION TIPE SUPERVISION (CPGE) REALIZATION OF PROJECTS REALIZATION OF HOMEWORK OR AT HOME

Are you facing challenges with your current engineering courses? Are you in a position where you need to resit an exam? Are you considering using professional tutoring/mentoring support to excel in the upcoming (resit) exams? If any of these topics resonate with you, these classes may be what you're looking for. In these special, tailored classes, we will uncover what is it that is potentially holding you back in your performance and understanding, and attack these issues head-on. With this, I will guide, mentor, and facilitate your growth and intuitive technical understanding further. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

The course of architectural design and executive drawings is a very important scientific subject for university students, as well as graduates of architectural engineering, and also lovers of the field. This course includes learning: The foundations of successful architectural design and how to distribute spaces How to make executive drawings from scratch to professionalism How to create an integrated architectural project and ready-to-implement executive drawings

Tansform your work to a strong conceptual project, where I will also teach you communication skills that allows you to cleverly explain your project to your professors. I'm an architect graduated from the Lebanese University with a specialised Master from Spain, with experience in Lebanon and Europe. I assist students in their architecture studio projects, from developing concepts, master planning, 3D drawings, until submission if needed (remotely or in person). I also teach AutoCAD and Revit (essential and advanced levels). The first step is to have confidence in your work, so I will also help you build your personality as an architect by providing you with 7 years worth of architectural knowledge. Let's start learning!

You will learn the DMAIC cycle, a proven method that helps solve problems by first identifying the causes before devising and implementing solutions. You will receive a set of practical recommendations, methodological materials, forms, and templates to integrate into your organization. As a result, you'll observe the outcomes and effectiveness of the approach, which you can adapt as needed during its application.

Do you aspire to master mathematics, physics and engineering at a university level? Do you want to exceed your limits and excel in these demanding fields? Do not search anymore ! Our tailor-made private lessons are there for you. Why choose our courses? Unparalleled Expertise: Our professors are experts in their field, with extensive experience in university teaching. They are ready to guide you towards success. Personalized Program: We tailor each course to your specific needs, from understanding fundamental concepts to solving complex problems. Total Flexibility: Choose the schedule that suits you best. Whether you are an active student or a professional, we adapt to your schedule. Constant Support: You will benefit from continuous monitoring between classes to answer all your questions and concerns. Quality Teaching Materials: We provide high-quality learning resources to support your progress. Who can benefit from our courses? High school students preparing for their baccalaureate or entrance exams to engineering schools. University students pursuing a degree in mathematics, physics or engineering. Professionals looking to acquire or deepen technical skills. Join us today! Excellence doesn't wait. Contact us now to book your first lesson. Together we will build a bright future based on a solid understanding of mathematics, physics and engineering.

This class is designed for architecture students, professionals, and design enthusiasts who want to excel in Autodesk Revit. Whether you're a beginner looking to grasp the fundamentals or someone seeking to refine your skills, I provide tailored lessons to suit your goals. You will learn: Revit Basics: Interface, tools, and workflows. 3D Modeling: Creating detailed models for buildings and interiors. Documentation: Producing accurate plans, sections, and elevations. BIM Techniques: Collaborative workflows for efficient project management. Advanced Features: Parametric families, rendering, and schedules. As a qualified architect with extensive Revit experience, I bring real-world insights into my teaching. I have successfully guided both university students and professionals in mastering the program, helping them apply it effectively to academic and industry projects. My interactive lessons focus on practical, hands-on learning to ensure you gain confidence and proficiency in Revit.

A talented, experienced, very creative and studious architect offers private lessons and assistance in various tasks related to architecture: *help with designing plans (houses/offices/businesses, shopping centers, clinics, etc.) * training and realization of 3D plans * realization and training in AUTOCAD *design, correction of projects, research of ideas, models, etc.... *Revit: learning and correction... + personalized training according to the needs for students and professionals in minimum time and remotely across the world

Learning Architectural design concepts developing analytical skills to overcome design problems making environment a suitable place to live in.Teaching through design problems,exploring various required softwares to help demonstrate the ideas.