Collège-Lycée: ENGINEERING SCIENCE courses at home or by video

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

These courses provide a comprehensive understanding of the fundamental principles of thermodynamics and fluid mechanics, emphasizing real-world applications in engineering, physics, and environmental systems. Students will develop problem-solving skills through theoretical concepts, numerical examples, and interactive simulations. Key Topics Covered: Thermodynamics: Laws of thermodynamics (Zeroth, First, Second, Third) Thermodynamic systems & processes (isothermal, adiabatic, etc.) Entropy, enthalpy, and heat engines PV diagrams & cycle analysis (Carnot, Rankine, Brayton) Phase transitions & properties of pure substances Fluid Mechanics: Fluid properties (viscosity, density, pressure) Bernoulli’s equation & conservation laws Laminar vs. turbulent flow (Reynolds number) Boundary layers, drag, and lift forces Pipe flow analysis & pump systems

I'm an experienced tutor and Aerospace Engineer working as a control engineer in the space business. I hold a 5-year experience tutoring more than 60 engineering undergrad students, helping them understand the technical contents and prepare for their exams. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Among the subjects I've previously taught you can find Controls, Flight Mechanics, Fluid Mechanics, Design, Aerospace Structures, among many others. I've also helped students with their dissertations and even mentored students in their transition to the profesional world. __________________________________________________________________________________ Previously supported students in Aerospace, Mechanical, Electrical Engineering, among others, from universities like: UK: - University of Bristol - Swansea University - Imperial College London (+ Business School) - University College London - King's College London NL: - Delft University of Technology SW - ETH Zurich - Swiss Federal Institute of Technology ES: - Universidad Carlos III de Madrid - Universidad Politécnica de Madrid

Doctor and graduate in mechanical engineering, I give private lessons at the following level: * Kinematic Model Course (direct or inverse) * Dynamic Model Course (direct or reverse) * Static Model Course (direct or inverse) * Course Planning the trajectory * Robot Control Course * Programming course on Matlab or RoboStudio.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process. Key topics covered include: - Fundamentals of electrical engineering principles and standards. - Introduction to Building Information Modeling (BIM) concepts and workflows. - Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting. - Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans. - Performing electrical load analysis and simulation to ensure system efficiency and compliance. - Best practices for organizing, managing, and sharing electrical project data effectively. Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering. For more information, please do not hesitate to text me.

Mechanical engineering topics is a broad field that covers various related to the design, analysis, and manufacturing of mechanical systems. Here's a brief overview of the core subjects you would typically study during a mechanical engineering program at university: Mathematics: Calculus: For understanding changes in systems, modeling dynamic behavior, and analyzing forces and motions. Linear Algebra: Used for solving systems of equations, matrix operations, and structural analysis. Differential Equations: Essential for modeling physical systems that change over time (eg, motion, heat, fluid flow). Probability and Statistics: For analyzing data, reliability, and risks in engineering systems. Physics: Mechanics: Studying the forces and motion in solid bodies (statics and dynamics). Thermodynamics: Understanding energy systems, heat transfer, and the conversion of energy between mechanical forms. Fluid Mechanics: Focuses on the behavior of fluids (liquids and gases) in motion and at rest, which is essential for systems like pumps, engines, and turbines. Material Science: Exploring the properties of materials and how they behave under various conditions (stress, temperature, etc.). Statics and Dynamics: Statics: Study of forces in equilibrium, such as the forces on structures or machines that are not moving. Dynamics: Study of forces and motion in systems that are in motion, including vibrations, acceleration, and kinematics. Strength of Materials: Learning how materials respond to various forces, including stress, strain, bending, and torsion. This is essential for designing durable and safe structures and machines. Manufacturing Processes: Understanding different manufacturing techniques such as casting, welding, machining, 3D printing, and material forming. Concepts of production planning, quality control, and design for manufacturability. Control Systems: Study of systems that maintain desired outputs (eg, in robotics or automated systems). This includes understanding feedback loops and stability. Machine Design: Focus on designing mechanical components (gears, shafts, bearings) to perform specific tasks reliably and efficiently. Heat Transfer: Studying how heat moves through materials and fluids, which is critical for applications like engines, HVAC systems, and electronics cooling. Dynamics of Machinery: The study of moving mechanical components, their vibrations, and how to design them to minimize failure and wear. Computational Methods: Learning how to use software tools (like CAD, FEM, and CFD) for designing, simulating, and analyzing mechanical systems. Robotics and Automation: Study of robotic systems, automation in manufacturing, and how to integrate mechanical components with electronic control systems. Renewable Energy and Sustainability: Topics related to sustainable engineering solutions, energy-efficient systems, and the use of renewable energy sources (wind, solar, etc.).

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs. Homework help for Baccalaureate students. preparation for the competition. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

Are you facing challenges with your current engineering courses? Are you in a position where you need to resit an exam? Are you considering using professional tutoring/mentoring support to excel in the upcoming (resit) exams? If any of these topics resonate with you, these classes may be what you're looking for. In these special, tailored classes, we will uncover what is it that is potentially holding you back in your performance and understanding, and attack these issues head-on. With this, I will guide, mentor, and facilitate your growth and intuitive technical understanding further. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

God willing, it is possible to explain the subjects of the Communications Department, such as antennas, electromagnetic waves, mobile phone communications, signal analysis, electromagnetic fields, and some subjects of Electrical Engineering, such as electrical circuits, forces, and electrical machines, and some subjects of the Computers Department, such as programming. It is also possible to explain the subjects of Engineering Mathematics.

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems. - Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws. - Electronic components: Resistors, capacitors, inductors, diodes. - Operational amplifiers: Operation, characteristics, applications. - Basic analog circuits: Amplifiers, filters, oscillators. - Introduction to digital electronics: Binary logic, logic gates, combinational circuits. - Numbering systems: Conversion between bases, adders, subtractors. - Transistors: Bipolar transistors, field effect transistors, characteristics, applications. - Transistor amplifiers: Configuration, gain calculations, stability. - Analog integrated circuits: Voltage regulators, A/D and D/A converters. - Sequential digital systems: Flip-flops, registers, counters. - Microcontrollers and microprocessors: Architecture, basic programming, interfaces. - Analysis of electronic circuits: Frequency and time analysis methods. - Advanced analog circuits: Differential amplifiers, power amplifiers, active filters. - Modulation and demodulation techniques: AM, FM, PM. - Embedded systems: Design of real-time systems, communication between peripherals. - Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators. -

Hi! Welcome to my class on Matlab programming! As a PhD student in Geophysics my main tool is my computer. In order to do science one needs to know how to program. I often use Matlab in order to analyze data, run numerical models, plot results and much more. So, let's embark on the journey of learning Matlab and explore its diverse capabilities together! For beginners: I have designed it for absolute beginners to become at ease with the language within 5 sessions of 1h. Message me to know the 5 classes curriculum and I will be more than happy to share it with you! For intermediate users: If you already know the basics of Matlab but want to go more in-depth on certain packages this is the right place! Message me and we can discuss what your needs are!

Course description: This comprehensive course is designed for architects, designers, engineers, and creatives who are passionate about 3D modeling and parametrics. You will learn to master Rhino 3D, a powerful 3D modeling software, as well as Grasshopper, a parametric plugin that allows you to generate complex shapes using visual programming. Course objectives: Learn how to use Rhino's basic and advanced tools to create accurate and detailed 3D models. Master the concepts of parametric modeling using Grasshopper to generate dynamic and adaptive shapes. Understand how Rhino and Grasshopper integrate to automate design processes and improve efficiency. Create real-world projects ranging from designing simple geometric shapes to complex, custom structures. Course content : Introduction to Rhino 3D: Interface, basic commands, and navigation in the 3D workspace. Advanced modeling techniques: Creation of surfaces, solids and networks of curves. Introduction to Grasshopper: Understanding the logic of visual programming and its applications in parametric design. Parametric Design: Using Grasshopper to create complex shapes based on variables and constraints. Practical application: Completing a complete project by combining Rhino and Grasshopper, from design to completion. Prerequisites: No specific prerequisites are necessary for this course. However, a basic knowledge of 3D design or modeling software is a plus. Target audience : Architects and designers wishing to deepen their skills in 3D modeling and parametric design. Engineers and technicians interested in design automation and the integration of digital solutions into their creative process. Methodology: The course combines theoretical explanations with practical exercises and case studies. Question-and-answer sessions and workshops will allow participants to work on personal projects throughout the training.

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). My extensive teaching experience covers a wide range of engineering courses, including: - Mathematics: algebra, linear algebra, probability, calculus, differential equations, intellectual math, and advanced engineering mathematics. - Mechanical Engineering: Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid Mechanics, Thermodynamics, Heat transfer, Engineering drawing, Applied Mechanics, Composite Structures, Flight, Machine Elements, Manufacturing, 3D printing, and more. - Physics: mechanics, momentum and energy, electricity, charge and current, electric and magnetic fields, waves, particle physics, nuclear decay, astrophysics, cosmology, oscillations, etc. - CAD/CAM Software: Autocad, Solidworks. - Mechanical Design Packages: ANSYS, APDL programming, ABAQUS, MATLAB, Symbolic MATLAB, LS-DYNA. My research and teaching interests are diverse, including: • Additive manufacturing • Mechanical metamaterials • Acoustical metamaterials • Electromagnetic metamaterials • Aeroacoustics • Soft matter and soft robotics • Fatigue and fracture mechanics • Experimental mechanics • Multiscale numerical modelling • Biomaterials • Porous materials • Manufacturing of medical devices and implants • Deep learning • Image processing • Topology optimization • Origami and Kirigami structures • Self-folding and self-assembly structures • Tissue engineering • Permeability in porous materials • Fluid-Solid Interaction I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter. If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Hello everyone and have a nice day, As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him. Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen. For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an. There is a lot of expertise in this article, too: - Matlab, Simulink, - S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation, - Electrical drives and E-Motoren, - STM32 Microcontroller, - Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme, - Power electronics / Leistungselektronik, - Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten, - ... There is a lot of contact with you. Very nice greetings